Rd Party Systems - Siemens DMS8000 Application & Planning

rd
3.4 3 party systems
‡
MM8000 only
Building Technologies
CPS Fire Safety
The MM8000 and MK8000 Danger Management Systems, and the NK8000 Networks
MP4.81 support the following 3
Note: The following systems are available as add-on packages.*
è Please refer to product-specific documentation.
Automation level configuration types
- Direct RS-232
- NK8000
- Direct LAN
- OPC connectivity (client/server)
Network components
- NK82xx
Control units
- Modbus-based systems
- CDDL/CDSF-based systems
- Systems that provide an OPC server interface
Fire detection systems:
- Autronica BSxxx
- LIST SCU 2000
‡
Intrusion detection systems:
- MAXSYS PC6010
Gas detection systems:
- CP100
‡
Video systems:
- Philips Burle Allegiant LTC 8x00 video switchers (available in standard setup)
- Geutebrück MultiScope II Plus and MultiScope III DVRs
- NICE DVRs – Alto, Pro, NVSat, NVR9000
- Bosch Divar 700 series DVRs, encoders/decoders, and IP cameras
Note: For a complete list of supported devices, see the MM8000 Datasheet.
- Generic DVRs via OPC
- ONVIF-compliant cameras
Access control:
- RCO R-Card M5
® For network connectivity options, see Appendix A.
* More add-on packages may be available than what is listed above.
à Check on the FS-DMS Intranet (PSP).
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
rd
party systems:
‡
‡
‡
‡
‡
Automation level configurations
‡
‡
‡
69
09.2016