Building Technologies
CPS Fire Safety
Current version
Date
A6V10063710_a_en
06.2013
A6V10063710_a_en
06.2012
A6V10063710_a_en
06.2011
A6V10063710_b_en
12.2010
A6V10063710_a_en
06.2010
A6V10063710_b_en
12.2009
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
Notes
- NK823x Web Server for monitoring and configuration
- FTP passive mode supported
th
14
Application & Planning edition for all Siemens DMS, Net-
rd
work, and 3
party products (MP4.60)
Updates include:
–
XLS panel support by MK8000
–
NK823x:
–
SD card supporting memory expansion for logging storage
–
STT20 BACnet connectivity support
–
Support of large Sinteso (Cerberus PRO)/STT20 systems
–
Enhanced firewall support (Edge FW Advanced)
BACnet/IP connectivity limitations
–
NK8235: Up to 32 Modbus panels supported on RS485
–
th
13
Application & Planning edition for all Siemens DMS, Net-
rd
work, and 3
party products (MP4.50)
Updates include:
–
NK823x:
–
Dual Ethernet interface supporting redundancy and net-
work separation; also routing and firewall functions
–
USB port supporting memory expansion for logging storage
Modbus Gateway for multiple Modbus clients, devices
–
–
Support of two upstream CEI 79-5 hosts
–
STT20 BACnet connectivity support by MM8000/MK8000
Enhanced Bosch video device support
–
ONVIF-compliant camera support
–
Architectural drawing updates according to new MM8000 UI
–
MT8001 Management Terminal phased out
–
Siemens Building Technologies now in Siemens Infrastruc-
–
ture and Cities Sector
th
12
Application & Planning edition for all Siemens DMS, Net-
rd
work, and 3
party products (MP4.40)
Updates include:
New Bosch video subsystem support (MM8000)
–
rd
3
party generic DVR support via OPC (MM8000)
–
–
Support for up to 15 clients (MM8000 / MK8000)
NK823x support of FS20/FS720
–
NK823x acts as FS20/FS720 Modbus Gateway for 3
–
Modbus stations/devices
–
New NK8237 Modbus Gateway
–
New application port number for NK823x secure download
SNMP support (NK823x only)
–
th
11
Application & Planning edition for all Siemens DMS, Net-
rd
work, and 3
party products (MP4.30-01)
Updates include:
Documentation pertaining to NK823x product enhancements
–
MP4.30-01
Documentation pertaining to MM8000/MK8000 product en-
–
hancements MP4.30-01
th
10
Application & Planning edition for all Siemens DMS, Net-
rd
work, and 3
party products (MP4.30)
Updates include:
MM8000 multiple server support
–
NK823x dual Ethernet interface for redundant networking
–
NK823x onboard digital I/Os
–
NK823x support of CS115/FC330A
–
NK822x remote tunnelling for CS6 Guarto
–
Management level configurations section content enhanced
–
and restructured
–
Illustration updates
th
9
Application & Planning edition for all Siemens DMS, Network,
rd
and 3
party products (MP4.20-01)
Updates include:
Documentation pertaining to release of NK823x products
–
MP4.20-01
Introduction – products concept
rd
party
7
09.2016