Siemens DMS8000 Application & Planning page 92

Licenses
If no, check with FS-DMS hotline to learn if this protocol is supported.
Support mailbox: fs.support.sbt@siemens.com
Support Centre intranet site:
Network
Point-to-point (serial) connections
Are we in control of all the lines?
Is the specification of all the cabling available?
Are all lines to be used within the specification (distance limits)?
Are leased lines/PSTN/ISDN lines to be used?
Network connections
Management station connectivity
How many management stations are foreseen?
Is a management level network foreseen (interconnection of different man-
agement stations only)?
If yes, what type of management level network (Ethernet, Token Ring,
FDDI, ATM, etc.)
Management station to gateway connectivity
Is a network planned to connect management station(s) and gateway(s)?
If yes, what type of network (Ethernet, Token Ring, FDDI, etc.)
Is the network used exclusively for our safety and security applications?
Are we in control of the network?
If not, who is in control of the network?
92
Building Technologies
CPS Fire Safety
http://intranet.siemens.com/bt/csc-fs
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
09.2016