Rs232 And Telnet Commands - HDTV Supply MT0404-NA2 User Manual

RS232 and Telnet Commands

Command
?
HELP
STATUS
PON
POFF
IR ON/OFF
KEY ON/OFF
BEEP ON/OFF
RESET
DBG TX xx OSP SRC
DBG TX xx OSP SNK
OUT xx ON/OFF
OUT xx CSC cc
OUT xx FR yy
EDID xx CP yy
EDID xx DF zz
www.hdtvsupply.com
Action
Print Help Information
Print Help Information
Print System Status And Port Status
Power On, System Run On Normal State
Power Off, System Run On Power Save State
Set System IR Control On Or Off (Only for IR Extension)
Set System KEY Control On Or Off
Set Onboard Beep On Or Off
Reset System To Default Setting,
Should Type 'Yes' To Confirm, 'No' To Discard
HDCP version follows source
xx=01-04 (input)
xx=00, all inputs 01-04
HDCP version follows sink
xx=output 01-04 (output)
xx=00, all outputs 01-04
Set OUTPUT:xx On Or Off
Set OUTPUT: xx Color Space Convert Mode
xx=00: Select All INPUT Port
xx=[01...04]: Select One INPUT Port
cc=OFF: Disable Convert Function
cc=420: Always Convert 6G 444 Format To 3G 420
cc=AUTO: Auto Convert 6G 444 Format To 3G 420
When Detect Sink Not Support 6G 444
Set OUTPUT:xx From INPUT:yy
Set Input:xx EDID Copy From Output:yy
Set Input: xx EDID To Default EDID zz
xx=00: Select All INPUT Port
xx=[01...04]: Select One INPUT Port
yy=[01...04]: Select One OUTPUT Port
11
MT0404-NA2 User Manual
HDTV Supply, Inc.