Rs232 And Telnet Commands - HDTV Supply HDTVCV0702HDS User Manual

Baud Rate: 57600 bps
Data Bit: 8-bit
Parity: None
Stop Bit: 1-bit
Flow Control: None

RS232 and Telnet Commands

No. Command
1 ?
2 HELP
3 STATUS
4 PON
5 POFF
6 IR ON/OFF
7 KEY ON/OFF
8 DBG ON/OFF
9 BEEP ON/OFF
10 RESET
11 OUT xx FR yy
12 OUT SP/MX
13 OUT RES rr
HDTV Supply, Inc.
9 NC
Action
Print Help Information
Print Help Information
Print System Status And Port Status
Power On, System Run On Normal State
Power Off, System Run On Power Save State
Set System IR Control On Or Off
Set System KEY Control On Or Off
Set Debug Mode On Or Off
Set Onboard Beep On Or Off
Reset System To Default Setting
(Should Type "Yes" To Confirm, "No" To Discard)
Set OUTPUT:xx From INPUT:yy
Only )
Set OUTPUT To Splitter or Matrix Mode
Set Scaler Output Resolution
HDTVCV0702HDS User Manual
9 NC
xx=00: Select All OUTPUT Port
xx=[01...02]: Select One OUTPUT Port
yy=[01...04]: HDMI Input 01 ~ 04
yy=AV: AV Input( Output 02 Only )
yy=COMP: Component Input( Output 02
yy=VGA: VGA Input( Output 02 Only )
rr=01: 1080P@50Hz
rr=02: 1080P@60Hz
rr=03: 720P@60Hz
Contact: support@hdtvsupply.com 11