General" Page - HDTV Supply MT0404-NA2 User Manual

"General" page

① Select control mode: RS232 COM mode (Auto COM ports detected) or TCP mode
② List detected COM ports
③ List all Matrix devices after search operation
④ Click to search all Matrix devices that connected in same subnet
⑤ Click to configuration the selected Matrix's TCP control configurations
⑥ Click to connect or disconnect PC and Matrix ( Connection will be established
automatically before control commands sending )
⑦ Click to refresh device status: include device information displayed in ⑨ area and
Input/output port connection status in ⑩ area.
NOTE: Tab pages cannot be changed during control command is processing.
⑧ To enable or disable Input/output tags displaying when setting buttons on "Setting" page
focused
⑨ Device information display area
⑩ Input/output port connection status
www.hdtvsupply.com
14
MT0404-NA2 User Manual
HDTV Supply, Inc.