Related Manuals for HDTV Supply HDTVMT0808140
Summary of Contents for HDTV Supply HDTVMT0808140
- Page 1 HDTVMT0808140 User manual HDTVMT0808140 User Manual HDTV Supply, Inc. Contact: support@hdtvsupply.com 1 ...
-
Page 2: Hdtv Supply, Inc. Contact: Support@Hdtvsupply.com
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. HDTV Supply, Inc. Contact: support@hdtvsupply.com ... -
Page 3: Table Of Contents
Introduction.....................4 Features.....................4 Panel Descriptions......................4 Remote Control Descriptions...................7 Application Diagram......................8 Specifications......................9 Package Contents..................9 RS-232 Pin Assignment..................10 GUI Control....................10 10. Maintenance.........................20 11. Warranty Policy.......................20 12. Limitations of Warranty..................20 13. Exclusive Remedies..................21 14. RMA Policy...................21 HDTV Supply, Inc. Contact: support@hdtvsupply.com 3 ... -
Page 4: Introduction
HDTVMT0808140 User manual Introduction The HDTVMT0808140 8×8 Matrix routes six Hi-Def sources to any eight HDTV displays, supporting 1080p Full HD up to 4K plus all 3D formats, along with multichannel digital audio formats such as Dolby® True HD and DTS-HD® Master Audio™. Each source can be routed to any display using the front-panel push buttons, IR remote control, RS-232 interface, or via TCP/IP. - Page 5 4. HDMI outputs 1 to 8----Output for displays, AVR etc. 5. IR extension receiver input ---- 3.5mm stereo phone-jack 6. IR receiver window----Receive the IR from the remote control of HDTVMT0808140. 7. Power port---Use included DC adaptor to power the matrix switcher.
-
Page 6: Remote Control Descriptions
1 to 8 of inputs ), then INPUT-Y switched to ALL OUTPUTS C. Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP button in Zone OUTPUT HDTV Supply, Inc. Contact: support@hdtvsupply.com ... -
Page 7: Application Diagram
Press COPY buttonPress OUTPUT-X buttonPress INPUT-Y/ALL button C. User defined EDID to INPUT-Y/ALL Press USER1/USER2 buttonPress INPUT-Y/ALL NOTE: Pressing button sequence should be finished in 5 seconds, otherwise, operation discarded. Application Diagram HDTV Supply, Inc. Contact: support@hdtvsupply.com 7 ... -
Page 8: Specifications
32°F to 104°F (0°C to 40°C) Storage Temperature : -4°F to 140°F (-20°C to 60°C) Power Supply: 12V/5A DC Package Contents: 1x HDTVMT0808140 1x 12V DC power supply 1x Remote control 8x IR Transmitter, 9x IR Receiver. 1x mounting kit. -
Page 9: Rs-232 Pin Assignment
Power up Matrix (It will take about 5 seconds to be ready with “Di” beep sound ) Double click “8x8 HDMI Matrix Controller vx.x.exe” icon to run it How to control Matrix Common information HDTV Supply, Inc. Contact: support@hdtvsupply.com 9 ... - Page 10 Click to connect or disconnect PC and Matrix ( Connection will be established automatically before control commands sending ) ⑨ ⑦ Click to refresh device status: include device information displayed in area and ⑩ Input/output port connection status in area. HDTV Supply, Inc. Contact: support@hdtvsupply.com 10 ...
- Page 11 ④ Matrix device MAC address ⑤ Click OK to set configuration. If configuration is set OK, Matrix devices will be searched out again ⑥ Click to Close the window and configuration cancelled HDTV Supply, Inc. Contact: support@hdtvsupply.com 11 ...
- Page 12 One set of Input/output port tags can be set for Matrix device when COM control mode selected. Input/output port tags can be set for respective Matrix device according to device’s MAC address. Edit Input port tags ② After action of , edit form will pop-up as below: HDTV Supply, Inc. Contact: support@hdtvsupply.com 12 ...
- Page 13 Define tags for respective Output port, then displays connect the Output ports can be easily remembered. Click buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Output port, delete action will be discarded. HDTV Supply, Inc. Contact: support@hdtvsupply.com 13 ...
- Page 14 Pop-up tag messages When “Display Input, Output tags when focus setting buttons” checkbox on “General” page is checked and Input/output port tag has been defined, tag messages will pop up like as: HDTV Supply, Inc. Contact: support@hdtvsupply.com 14 ...
- Page 15 “1 Output” to “7 Outputs”: Set current Output (where mouse right clicked) and the next x-1 ( x range is from 1 to 7, set total x Outputs at the same time ) Output(s) from same Input HDTV Supply, Inc. Contact: support@hdtvsupply.com ...
- Page 16 After action of , edit form will pop-up as below: ① Pre-Setting name ② Set all Output ports from same Input ③ Select Input for respective Output “EDID control” page 7 8 HDTV Supply, Inc. Contact: support@hdtvsupply.com 16 ...
- Page 17 To enable or disable IR control function. When box checked, IR control function enabled, otherwise, IR control function disabled. This setting is not memorized. IR control function is always enabled after power up. “FW upgrade” page HDTV Supply, Inc. Contact: support@hdtvsupply.com 17 ...
- Page 18 Re-power up the Matrix, then wait for 10 seconds to ensure the Matrix is ready Run 8x8 HDMI Matrix Controller, open firmware file and upgrade again ④ Firmware upgrading messages display ⑤ Click to clear the messages displayed in the memo box. HDTV Supply, Inc. Contact: support@hdtvsupply.com 18 ...
-
Page 19: Maintenance
The warranty does not apply to any part of a product that has been installed, altered, repaired, or misused in any way that, in the opinion of HDTV Supply, would affect the reliability or detracts from the performance of any part of the product, or is damaged as the result of use in a way or with equipment that had not been previously approved by HDTV Supply. -
Page 20: Rma Policy
- to HDTV Supply. The HDTV Supply RMA number must be prominently displayed on the outside of your package. If you send your product to HDTV Supply without the RMA number prominently displayed on the outside of the package, it will be returned to you unopened. - Page 21 Shipping your RMA to HDTV Supply using regular mailing envelopes is not acceptable, as they do not protect the product from damage during shipping. HDTV Supply will not repair or replace a module that is shipped in such a way that the product is not properly protected. ...