Set Tcp Control Configuration - HDTV Supply MT0404-NA2 User Manual

Set TCP control configuration

Click Config button to show TCP configuration window.
① Set tag to identify Matrix device
② Set IP mode: Subnet should support DHCP protocol when set Auto IP mode, then Matrix
device will obtain IP automatically. Otherwise, set Static IP mode and designate a
useable IP for Matrix device
③ Set IP address, not editable when Auto IP mode selected.
Note: The last IP BYTE's range is 2-252.
Matrix device MAC address
④
⑤ Click OK to set configuration. If configuration is set OK, Matrix devices will be searched
out again
⑥ Click to Close the window and configuration cancelled
www.hdtvsupply.com
15
MT0404-NA2 User Manual
HDTV Supply, Inc.