"FW upgrade" page
① Click to open firmware file (file extension is ".fw").
② Firmware upgrade progress
③ Click the button to upgrade firmware.
NOTE: If failure occurs during upgrading firmware process, the following steps SHOULD
be done sequentially to establish next upgrading procedure:
1)
Power down the Matrix
2)
Close the 4x4 HDMI Matrix Controller
3)
Re-power up the Matrix, then wait for 10 seconds to ensure the Matrix is ready
4)
Run 4x4 HDMI Matrix Controller, open firmware file and upgrade again
④ Firmware upgrading messages display
Click to clear the messages displayed in the memo box.
www.hdtvsupply.com
23
MT0404-NA2 User Manual
HDTV Supply, Inc.