Page 1
MT0404-NA2 User Manual MT0404-NA2 4K/18G HDCP 2.2 4x4 HDMI Matrix w/ Audio Breakouts 3835-R Thousand Oaks Blvd, Unit 295 Westlake Village, CA 91362 TOLL FREE No.: 833-WolfPack (833-965-3722) TEXT: 805-409-0208 Mail: support@hdtvsupply.com www.hdtvsupply.com HDTV Supply, Inc.
Page 2
SAFTY AND NOTICE Do not substitute or use any other Power Supply other than the enclosed unit, or a HDTV Supply approved Replacement Part. Doing so will void the warranty and potentially expose the user to dangerous voltages resulting in an electrical shock.
MT0404-NA2 User Manual Introduction The MT0404-NA2 is a 4x4 HDMI matrix switcher with audio breakouts. It supports HDMI 2.0 and HDCP 2.2 with resolution support up to 4K@60Hz 4:4:4 plus all 3D formats with HDR output support for each channel. It routes four Hi-Def sources to any four HDTV displays, along with multichannel digital audio formats such as Dolby®...
MT0404-NA2 User Manual Panel Descriptions Front Panel IR receiving window -- Receive IR signal from the remote control of the matrix. ① ② Power LED indicator – Lit when getting power, off when no power. Output selection button 1 to 4 -- Press to select the input source from 1 to 4.
Page 6
IR extension receiver input -- 3.5mm stereo earphone jack, connect with an IR receiver ⑩ cable to receive the IR signal from remote control of MT0404-NA2 or control processor. ⑪ RS232 port – DB9 female, for control the matrix from PC or control processor Power port -- Use the included 12V/2A DC adaptor to power the matrix.
MT0404-NA2 User Manual Remote Control Output and Input select A. OUTPUT-X select INPUT-Y: 1. Press OUTPUT-X (X means 1 to 4 of outputs) Press INPUT-Y ( Y means 1 to 4 of inputs ) 2. Press OUTPUT-X (X means 1 to 4 of outputs) press the left and right arrow buttons to select the input.
MT0404-NA2 User Manual Package Contents 1x MT0404-NA2 1x 12V/2A DC Power Adapter 1x Remote Control 4x IR Transmitter 5x IR Receiver 2x Rack-mount Ears 1x CD for GUI software RS-232 Pin Assignment MT0404-NA2 (DCE) Remote Control Console (DTE) Assignment Assignment...
MT0404-NA2 User Manual RS232 and Telnet Commands Command Action Print Help Information HELP Print Help Information STATUS Print System Status And Port Status Power On, System Run On Normal State POFF Power Off, System Run On Power Save State IR ON/OFF...
MT0404-NA2 User Manual GUI Control PC System: Microsoft Windows Operation System Installation 4x4 HDMI Matrix controller is a green software. You just need to copy “4x4 HDMI Matrix Controller vx.x.exe” to the PC which is used to control the Matrix by RS232 COM or TCP to complete installation.
MT0404-NA2 User Manual “General” page ① Select control mode: RS232 COM mode (Auto COM ports detected) or TCP mode ② List detected COM ports ③ List all Matrix devices after search operation ④ Click to search all Matrix devices that connected in same subnet ⑤...
MT0404-NA2 User Manual Set TCP control configuration Click Config button to show TCP configuration window. ① Set tag to identify Matrix device ② Set IP mode: Subnet should support DHCP protocol when set Auto IP mode, then Matrix device will obtain IP automatically. Otherwise, set Static IP mode and designate a useable IP for Matrix device ③...
MT0404-NA2 User Manual “Port Tag” page ① Input port tags ② Click to edit Input port tags ③ Output port tags Click to edit Output port tags ④ NOTE: Edit boxes are read only, click “Edit” button to pop up window to edit the tags.
MT0404-NA2 User Manual Edit Input port tags After action of ②, edit form will pop-up as below: Define tags for respective Input port, then devices connect the Input ports can be easily remembered. Click buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Input port, delete action will be discarded.
MT0404-NA2 User Manual “Setting” page ① LED which displays Input number for respective Output port ② Click to select Input port for respective Output port ③ Click to select previous or next Input port for respective Output port ④ Display Output from Input with tag information when mouse moves over ② buttons ⑤...
MT0404-NA2 User Manual Pop-up tag messages When “Display Input, Output tags when focus setting buttons” checkbox on “General” page is checked and Input/output port tag has been defined, tag messages will pop up like as: Pop-up Menu When mouse moves over ② setting buttons, and click mouse right button, menu will pop up like as: www.hdtvsupply.com...
MT0404-NA2 User Manual All Outputs: All Outputs from same Input “1 Output” to “4 Outputs”: Set current Output (where mouse right clicked) and the next x-1 ( x range is from 1 to 4, set total x Outputs at the same time ) Output(s) from same Input Port to Port: Output1 from Input1, Output2 from Input2, Output3 from Input3, etc.
MT0404-NA2 User Manual “EDID control” page Set EDID mode for selected Input port or All Input ports, click “Set” button to complete ① action. NOTE: When set User1/User2 EDID mode, should Download EDID content to User1 Memory/User2 Memory first. User1/User2 default EDID content is 1080p, Stereo Audio 2.0.
MT0404-NA2 User Manual “IR Configuration” page To enable or disable IR control function. When box checked, IR control function enabled, otherwise, IR control function disabled. This setting is not memorized. IR control function is always enabled after power up. www.hdtvsupply.com...
MT0404-NA2 User Manual “FW upgrade” page ① Click to open firmware file (file extension is “.fw”). ② Firmware upgrade progress ③ Click the button to upgrade firmware. NOTE: If failure occurs during upgrading firmware process, the following steps SHOULD be done sequentially to establish next upgrading procedure:...
HDTV Supply is responsible for the freight charges only for return of the equipment from the factory to the owner. HDTV Supply will return the equipment by the same method (i.e., Air, Express, Surface) as the equipment was sent to HDTV Supply.
HDTV Supply cannot identify the cause of the reported failure. Exclusive Remedies HDTV Supply warranty, as stated is in lieu of all other warranties, expressed, implied, or statutory, including those of merchantability and fitness for a particular purpose. The buyer...
Shipping your RMA to HDTV Supply using regular mailing envelopes is not acceptable, as they do not protect the product from damage during shipping. HDTV Supply will not repair or replace a module that is shipped in such a way that the product is not properly protected.