Remote Control; Output And Input Select; Edid Set Up - HDTV Supply MT0404-NA2 User Manual

Remote Control

Output and Input select

A. OUTPUT-X select INPUT-Y:
1. Press OUTPUT-X (X means 1 to 4 of outputs)
2. Press OUTPUT-X (X means 1 to 4 of outputs)
to select the input.
B. All outputs select INPUT-Y: Press ALL button in zone OUTPUT
( Y means 1 to 4 of inputs ), then INPUT-Y switched to ALL OUTPUTS
C. Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP
button in Zone OUTPUT

EDID Set Up

A. Fixed EDID to INPUT-Y/ALL
Press 1080I/1080P/3D/4K
INPUT
B. Copy EDID of OUTPUT-X to INPUT-Y/ALL
Press COPY button
C. User defined EDID to INPUT-Y/ALL
Press USER1/USER2 button
NOTE: Pressing button sequence should be finished in 5 seconds, otherwise,
operation discarded.
www.hdtvsupply.com
inputs )


Press OUTPUT-X button

Press INPUT-Y ( Y means 1 to 4 of

press the left and right arrow buttons
Press 2.0CH/5.1CH/7.1CH

Press INPUT-Y/ALL button

Press INPUT-Y/ALL
7
MT0404-NA2 User Manual

Press INPUT-Y button

INPUT-Y/ALL button in Zone
HDTV Supply, Inc.