Agilent 89600 Vector Signal Analysis Software - Keysight M9392A Startup Manual

Agilent 89600 Vector Signal Analysis Software

To use the Agilent 89600 Series VSA Software measurement capabilities, you must first create a connection
between the software and the hardware configuration that is your M9392A Vector Signal Analyzer. If you are
using M9392A instruments in a multi-channel configuration, see
If are using Version 14.2 of Agilent 89600 VSA software, do not use the procedure below. Instead,
use the Connection procedure found in the M9392A SFP Help system. Open the help system (Pro-
grams > Agilent > M9392 > M9392 Help) and navigate to the "Using Measurement Capabilities of
the Agilent 89600 Series VSA Software" topic.
To create a new M9392A instrument using the modules method, use the Agilent 89600 VSA Software and follow
these steps:
1. Open the "New Hardware Configuration" window in the Agilent 89600 VSA software by selecting: Util-
ities > Hardware > Configurations from the menu bar. When you hover over the last element in this
sequence you will see a listing of the relevant configurations. Click on the "Add New Hardware" icon
2. In the "New Hardware Configuration" window:
Agilent M9392A PXI Vector Signal Analyzer Startup Guide
Agilent 89600 Vector Signal Analysis Software
Multichannel Overview (page 40).
.
45