Connect The Ethernet Cable - Sun Microsystems Sun Enterprise 220R Setup And Rackmounting Manual

Connect the Ethernet Cable

Connect only one Ethernet cable to the standard Ethernet port on the back of your
system—either a twisted-pair Ethernet (TPE) cable or a Media Independent Interface
(MII) transceiver. You can make additional Ethernet connections by installing PCI
Ethernet cards.
Sun Microsystems offers an MII-to-AUI transceiver as a separately orderable option.
A number of third-party MII transceivers are also available for connection to TX, T4,
FX, and AUI type Ethernet networks. See the Sun Enterprise 220R Server Owner's
Guide for more information.
1. To connect a TPE cable:
a. Connect the TPE cable to the RJ-45 connector on the system back panel.
b. Connect the other end of the cable to the TPE outlet in the wall or the floor.
Chapter 3 System Setup en-25