Positioning; Unpacking The Appliance - Baumatic BHC607 Instruction Manual

Positioning

This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600 mm worktop that is at least 30
mm thick. The following minimum clearance distances must be
observed:-
o 700 mm between the hob surface and the underside of any
o 50 mm clearance around the sides and front of the appliance.
o 55 mm clearance between the back of the hob surface and the
o If the hob is positioned so that the right or left hand side of the

Unpacking the appliance

When unpacking the appliance please check that the following items
are contained within the packaging:-
1 Baumatic hob
1 Ceramic hob scraper
1 Installation and instruction manual
1 Baumatic guarantee card
4 Fixing brackets
4 Fixing screws
1 Sealing strip
Downloaded from www.Manualslib.com
The adjacent furniture must be able to withstand a
minimum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
periods of use.
horizontal surface above it.
wall behind it.
appliance will be near to the edge of a kitchen unit. There must
be a gap of at least 150 mm between the side of the hob and the
vertical surface of the kitchen unit.
manuals search engine
21