My Appliance Isn't Working Correctly - Baumatic BHC607 Instruction Manual

My appliance isn't working correctly

o The cooking zones are not functioning or will not switch
* It has been more than 1 minute since the appliance was
* The safety lock has been switched on (see the "Locking the hob
* Several cooking zone selection buttons have been pressed at
* The safety cut out has been triggered. Press the ON/OFF button
* Check that the mains electrical supply to the appliance is correct
o The residual heat indicator has not come on after I have
* The cooking zone has only been turned on for a short period of
* IMPORTANT: If the cooking zone does appear to be hotter than
o A humming sound is heard when a cooking zone is
* This is normal; the sound will disappear when the zone heats up.
o The cooking zones have become discoloured.
* This maybe caused by burnt on remnants of food. This will not
Downloaded from www.Manualslib.com
on.
switched on. You should switch the appliance back on again,
using the ON/OFF button and then switch on a cooking zone.
top" section for information on how to switch off the safety lock).
once. You should only try to switch on one cooking zone at once.
to reset the hob.
and working. Check the mains fuse.
switched a cooking zone off.
time; therefore it did not go above 60°C.
60°C and the residual heat indicator has not come on, you
should call the Customer Care Department.
selected.
affect the working of the appliance. However you should make
sure that the cleaning instructions are being followed regularly.
manuals search engine
27