Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baumatic BHC605
Summary of Contents for Baumatic BHC605
- Page 1 BHC605 60cm touch control ceramic hob...
- Page 2 User Manual for your Baumatic BHC605 60 cm Front touch control 4 zone ceramic hob. NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
18 - 23 Positioning Unpacking the appliance Installing the appliance 19 – 20 Electrical connection Connecting the mains supply cable 21 - 22 Replacing the mains supply cable My appliance isn’t working correctly 24 – 25 Baumatic consumables Contact details... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made... - Page 6 Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the...
- Page 7 Please see the s pecific section of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 8: Specifications
Specifications Product dimensions: Aperture dimensions: Height: 52 mm Depth: 495 mm Width: 590 mm Width: 565 mm Depth: 520 mm Product specifications: o 2 x 1.80 kW hyperspeed zones (diametre 200 mm) o 2 x 1.20 kW hyperspeed zones (diametre 160 mm) o Front touch control operation o 4 individual residual heat indicators o Safety lock... -
Page 9: Ceramic Hob Layout
Electrical details Rated Voltage: 220 - 240 Vac 50 Hz Supply Connection: 30 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 5.50 – 6.60 kW Mains Supply Lead: 3 core x 4 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. -
Page 10: Control Panel Layout
Control panel layout Safety lock button Cooking zone minus button Cooking zone indicator Cooking zone plus button Timer minus button Timer display Timer indicator Timer plus button ON/OFF button Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance”... -
Page 11: Switching The Hob Top On
Switching the hob top on o Press the ON/OFF button (9) to switch on the appliance. o The hob will beep once and all of the cooking zone indicators will light briefly, then go out. o This means that the hob has entered stand-by mode. Switching on a zone and setting a power level IMPORTANT: A zone must be selected within 2 minutes of switching the hob on. -
Page 12: Switching Off The Hob
Switching off the hob o Once you have switched off all of the cooking zones, you should turn off the hob. o Press the ON/OFF button (9). o It is possible to turn the hob off at any time by pressing the ON/OFF button (9). -
Page 13: The Hob Timer
o When the safety lock has been switched on, it will disable any of the other buttons on the control panel, apart from the ON/OFF button (8). o To disable the safety lock feature, you should press and hold the safety lock button (1) again. -
Page 14: Safety Cut-Off
o Use the timer plus and minus buttons to adjust the time by 10 minutes. o Once the desired time is set, release all buttons and after 5 seconds the timer countdown will be set. o The timer display will show the remaining countdown time. o When the set time is reached, a buzzer will sound for 30 seconds and the timer display will show “- -“. -
Page 15: Hob Guidelines
Hob guidelines o The first few times the hob top is used, it may give off an acrid, burning smell. This smell will disappear completely with repeated use. o The worktop is fitted with cooking areas of different diameter and power. -
Page 16: Cleaning And Maintenance
Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it. -
Page 17: Using A Ceramic Hob Scraper
Using a ceramic hob scraper Your appliance will be provided with a hob scraper. The following guidelines should also be followed when using the ceramic hob scraper:- o The scraper should be placed on the ceramic surface at an angle. o Residues should be removed by sliding the blade carefully over the ceramic surface. -
Page 18: Installation
When unpacking the appliance please check that the following items are contained within the packaging:- 1 Baumatic hob 1 Ceramic hob scraper 1 Installation and instruction manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws 1 Sealing strip... -
Page 19: Installing The Appliance
Installing the appliance o Cut a hole in the worktop that corresponds with the drawing shown above. o IMPORTANT: You must observe ventilation requirements shown in the drawing opposite. o IMPORTANT: There ventilation holes around the outside of the hob. YOU MUST ensure that these holes are not blocked by the work top, when you put the hob into position (see drawing... - Page 20 o Carefully turn the hob upside down and place it on a cushioned mat. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future, particularly if it needs to be serviced.
-
Page 21: Electrical Connection
Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. - Page 22 o The cable connections must be in accordance with the diagram located on the bottom of the hob (see above). o You should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws. o If when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened.
-
Page 23: Replacing The Mains Supply Cable
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at the control switch. o Open the terminal block on the underside of the hob. -
Page 24: My Appliance Isn't Working Correctly
My appliance isn’t working correctly o The cooking zones are not functioning or will not switch * It has been more than 2 minutes since the appliance was switched on. You should switch the appliance back on again, using the ON/OFF button and then switch on a cooking zone. * The safety lock has been switched on (see the “Locking the hob top”... - Page 25 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
-
Page 26: Baumatic Consumables
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk... -
Page 27: Contact Details
Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Lípovà 665 Baumatic Buildings, 460 01 Liberec 4 6 Bennet Road, Czech Republic Reading, Berkshire RG2 0QX +420 483 577 200 United Kingdom www.baumatic.cz Sales Telephone Slovakia (0118) 933 6900 Baumatic Slovakia, s.r.o.
Need help?
Do you have a question about the BHC605 and is the answer not in the manual?
Questions and answers