Assembly And Installation - S.R.Smith SlideAway Owner's Manual

D A ILY/W EEK LY M AI N T ENAN C E OF THE S LIDEAWAY
1. When hosing down the deck, hose your SlideAway to wash away any dust, dirt or other debris,
which may have accumulated.
2. Be sure that all connections are secure. Tighten hardware if necessary.
3. Polyethylene parts require little maintenance. Hose and wipe to clean.
4. While cleaning slide, check and see that all nuts and bolts are tight and secure.
5. Inspect the runway for visible cracks or tears, sharp edges and protrusions.
6. Inspect all attachment points for loose or corroded fasteners.
7. Inspect all ladder tread or step-attachment points for evidence of shear, bending yield, or fatigue
in the ladder steps, rails, or attachments means. Yield is evidenced by crystallization or fine cracking
of the ladder tread and/or surface.
8. Inspect the ladder handrails for rigidity and attachment.
A P PLIC A BLE S TAN D AR D S AN D CODES
The installation of the SlideAway must comply with all applicable governmental and building codes.
ASS E MB LY AND IN STALL ATIO N
All S.R.Smith SlideAway slides are inspected prior to shipment from the factory. Proper assembly, installation,
and placement is mandatory. Improper assembly and installation voids S.R.Smith's warranty and may affect the
safety of the user. It is the installer's responsibility to ensure the structural integrity of the concrete pad prior to
installation of the slide.
D RAWI NG S
All drawings in this Slide Owner's Manual are for illustration purposes only and are NOT TO SCALE.
SU B SE QU ENT O WN ER S
The Owner's Manual must remain with the owner of the slide. If the owner changes, the Owner's Manual
shall be brought to the attention of the new owner.
7