Table of Contents
Advertisement
HOSE AS SEMB LY I NS TRU C TIO N S
Tools Required
Phillips head screwdriver
Teflon tape or thread sealant
Assembly Steps
1. Thread the nipple (5) into 90˚ elbow (6) as shown in
Figure 8. It is recommended to apply a thread sealant
or Teflon tape to the threads to prevent leaking.
2. Install assembled nipple (5) and elbow (6) into the
threaded hole in the left side of the runway.
3. Turn the assembled nipple (5) and elbow (6) until the
open end of the elbow fitting is pointing back toward
the bottom of the stairs as shown in Figures 9 and
11.
4. Install the garden hose thread adapter (9) into the
open end of the elbow fitting (6) as shown in Figure
8. It is recommended to apply a thread sealant or
Teflon tape to the threads to prevent leaking.
5. Locate the dimple on the left side of the ladder as shown in Figure 9. Place the hose clip screw (8)
through the hole in the hose clip (7). Align the screw with the dimple in the ladder, and install the screw
into the ladder side wall. Tighten until snug making sure not to overtighten the screw.
6. Install the second hose clip in the recess on the back side of the ladder shown in Figure 10.
5
PVC NIPPLE
Figure 8
90 DEGREE ELBOW
6
GARDEN HOSE
9
ADAPTER
Figure 9
1 3
Advertisement
Table of Contents
