If The Oscilloscope Is Not Listed In Keysight Infiniivision Launcher - Keysight Technologies P9241A Startup Manual

If the oscilloscope is not listed in Keysight InfiniiVision Launcher

If your P924xA oscilloscope is not recognized after being plugged into a USB port
on your PC (that is, it does not show up in the Keysight InfiniiVision Launcher
window):
• Reboot your PC.
• If the oscilloscope still does not appear, try rescanning in the Keysight
Keysight P9241/42/43A Oscilloscopes Startup Guide
The Keysight InfiniiVision P924xA SFP has the same user interface as other
standalone Keysight InfiniiVision oscilloscopes.
This may be needed after a software update or the first time a P924xA
oscilloscope is plugged into a USB port it has not previously been connected
to.
Connection Expert:
Close the Keysight InfiniiVision Launcher.
a
Start the Keysight Connection Expert, by selecting Start > All Programs >
b
Keysight Connection Expert.
If any or all oscilloscopes are still not visible, in the Instruments tab, click
Rescan.
Restart the Keysight InfiniiVision Launcher.
c
6
Verify Operation
27