Bellfires Wi-fi box Manual page 17

Go to Wi-Fi Settings.
Connect Smart Device to Wi-Fi-Box. Password:
'MYFIREPLACE'
Back
Settings
Airplane Mode
Wi-Fi "myfi re_WiFi-Box_<EE9F>"
Bluetooth On
Notifi cations
Control Centre
Do Not Disturb
General
Display & Brightness
Wallpaper
Sounds
Passcode
Battery
Privacy
Important: If the Bellfi res Wi-Fi box is still not displayed after a few minutes, the
Wi-Fi box must be reset by pressing the reset button for 20 seconds (see
page 9). The Bellfi res Wi-Fi box will automatically restart after this. As
soon as it is displayed on the screen, the installation can be continued.
Users of IPhone or IPad with iOS 10.0 or higher:
After selection of the network "myfi re_WiFi-box" a message appears "No internet
connection". This message can be ignored. Continue with the instructions below after
selection of the network "myfi re_WiFi-box".
Instructions for use
Wi-Fi
Wi-Fi
"myfi re_WiFi-Box_<EE9F>"
CHOOSE A NETWORK ...
Other...
Ask to Join Networks
Known networks will be joined automatically. If no known networks are available, you will have
to manually select a network.
• Select OK
• Go to the Wi-Fi settings on
your smartphone or tablet
and connect to the Wi-Fi
network
"myfi re_WiFi-box_<number>"
OK
• Select the network
"myfi re_WiFi-box_<number>"
• It may take a few minutes
before the Bellfi res Wi-Fi
box is displayed.
• The password for the
Bellfi res Wi-Fi network is:
MYFIREPLACE
English
17