Bellfires Wi-fi box Manual page 11

LED
Power Blue
WLAN Green
Receiver Blue
All LEDs
• Optionally, an external temperature sensor can be connected to the Bellfi res Wi-Fi
box (˚C/˚F) to measure the room temperature. The end of the sensor must be placed
outside the immediate radiation area of the fi re.
Note: If the external temperature sensor is not connected, then the room temperature
will be read by the hand transmitter.
• The Bellfi res Wi-Fi box can now be set using the Bellfi res Gas app. The fi re can then
be operated using the Bellfi res Gas app.
• The fi re can also be operated with the hand transmitter supplied with the Bellfi res
Wi-Fi box (can be recognised by the blue sticker). Once the Wi-Fi box is installed, it
is no longer possible to operate the fi re using the old hand transmitter.
Instructions for use
Status
On: mains supply OK
Off: no mains supply
On: connected with the home network
Flashing: "Access point" mode. A connection
can be made to a home network.
See Chapter 3
Off: No network found
On: Bellfi res Wi-Fi box is connected with the receiver
Off: no connection with receiver
Flashing: Bellfi res Wi-Fi box is being internally
confi gured
English
11