Table of Contents
Advertisement
MAINTENANCE
Please remember to never leave the microscope with any of the objectives or eyepieces removed and
always protect the microscope with the dust cover when not in use.
SERVICE
®
ACCU-SCOPE
microscopes are precision instruments which require periodic servicing to keep them
performing properly and to compensate for normal wear. A regular schedule of preventative maintenance
by qualified personnel is highly recommended. Your authorized ACCU-SCOPE
for this service. Should unexpected problems be experienced with your instrument, proceed as follows:
1. Contact the ACCU-SCOPE
problems can be resolved simply over the telephone.
2. If it is determined that the microscope should be returned to your ACCU-SCOPE
®
ACCU-SCOPE
for warranty repair, pack the instrument in its original Styrofoam shipping carton. If you
no longer have this carton, pack the microscope in a crush-resistant carton with a minimum of three
inches of a shock absorbing material surrounding it to prevent in-transit damage. The microscope should
be wrapped in a plastic bag to prevent Styrofoam dust from damaging the microscope. Always ship the
microscope in an upright position; NEVER SHIP A MICROSCOPE ON ITS SIDE. The microscope or
component should be shipped prepaid and insured.
This microscope is warranted to be free from defects in material and workmanship for a period of five years from
the date of invoice to the original (end user) purchaser. The mercury power supply is warranted for a period of one
year from the date of invoice to the original (end user) purchaser. This warranty does not cover damage caused in-
transit, misuse, neglect, abuse or damage resulting from improper servicing or modification by other then ACCU-
SCOPE approved service personnel. This warranty does not cover any routine maintenance work or any other
work, which is reasonably expected to be performed by the purchaser. Normal wear is excluded from this warranty.
No responsibility is assumed for unsatisfactory operating performance due to environmental conditions such as
humidity, dust, corrosive chemicals, deposition of oil or other foreign matter, spillage or other conditions beyond the
control of ACCU-SCOPE INC.
consequential loss or damage on any grounds, such as (but not limited to) the non-availability to the End User of
the product(s) under warranty or the need to repair work processes. Should any defect in material, workmanship or
electronic component occur under this warranty contact your ACCU-SCOPE distributor or ACCU-SCOPE at (631)
864-1000. This warranty is limited to the continental United States of America. All items returned for warranty
repair must be sent freight prepaid and insured to ACCU-SCOPE INC., 73 Mall Drive, Commack, NY 11725 –
USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of
America, for all foreign warranty repairs return freight charges are the responsibility of the individual/company who
returned the merchandise for repair.
ACCU-SCOPE is a registered trademark of ACCU-SCOPE INC., Commack, NY 11725
®
ACCU-SCOPE
3019 FLUORESCENCE MICROSCOPE SYSTEM
®
distributor from whom you purchased the microscope. Some
LIMITED MICROSCOPE WARRANTY
This warranty expressly excludes any liability by ACCU-SCOPE INC. for
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
®
distributor can arrange
®
distributor or to
19
Advertisement
Table of Contents
