Renaming The Camera; Choosing Recording Mode - GeoVision GV-NVR System Lite V2 Series Quick Start Manual

Table of Contents

Renaming the Camera

You can give a new name for each camera.

1. On the main screen, click the Configure button, select System Configure, and click

Camera Configure.

2. In the Camera Name field, type a new name for the camera.

3. Click OK.

You can set each camera's recording mode individually for Motion Detection,

Round-the-Clock or Day-Night.

1. Click on the main screen, click System Configure and select Camera Configure.

2. From the Camera Name drop-down list, select one camera.

3. In the Rec Control field, select Rec Video, and use the drop-down list to select Motion

Detect, Round-the-Clock or Day-Night.

4. Click OK.

For details on setting camera properties, refer to Adjusting Individual Camera, Chapter 1,

DVR User's Manual (GV-Desktop < Program button < User Manual).

Table of Contents

Do you have a question about the GV-NVR System Lite V2 Series and is the answer not in the manual?

Gv-nvr lite v2 (rev. b) 1 tb Gv-nvr lite v2 (rev. b) 1.5 tb