Download Print this page

Changing Codec And Resolution Of Gv Ip Camera - GeoVision GV-NVR System Lite V2 Series Quick Start Manual

Table of Contents

4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP)

and click Properties.

5. Select Use the following IP address, type the new IP information, and click OK to finish

the setting.

Changing Codec and Resolution of GV IP Camera

Several resolution, aspect ratio and codec options are available for GV IP cameras, except

GV-Fisheye cameras.

1. On the main screen, click the Configure button, select System Configure, and click IP

Camera Install.

2. Click the listed camera, and select Change live view codec, Change record codec or

Change Resolution.

Table of Contents

Do you have a question about the GV-NVR System Lite V2 Series and is the answer not in the manual?

Gv-nvr lite v2 (rev. b) 1 tb Gv-nvr lite v2 (rev. b) 1.5 tb