Table of Contents
Advertisement
Changing the IP Address of GV IP Cameras
1.
On the GV-Desktop, click the Programs button and select VS Utility. The GV IP Device
Utility appears and automatically detects the GV IP cameras on the LAN.
2.
Double-click one camera in the list.
3.
Type the user name and password of the GV IP camera. By default both values are
admin.
4.
Type the new IP information.
5.
Click OK. The new IP address is updated to the camera.
Changing IP Address of GV-NVR System Lite V2
The GV-NVR System Lite V2 has a default IP address of 192.168.0.200 for connecting with
GV IP cameras automatically. You can also change the IP address of GV-NVR System Lite V2
by following the steps below.
Note: After you change the IP address of GV-NVR System Lite V2, you should also change
the IP addresses of GV IP cameras to the same network; otherwise, the GV-NVR System Lite
V2 will not detect the cameras for automatic connection.
12
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-NVR System Lite V2 Series and is the answer not in the manual?