Screen Summary - Graco ProMix 2KE Operation

Display Module

Screen Summary

The Display Module has two operating modes:
Run Mode
The run mode has three screen sections that control the
mixing operations.
Mix (Screens 2-4)
• Spray (Screen 2) controls most mixing opera-
tions.
• Batch (Screen 3) controls dispense of a set vol-
ume.
• Totals (Screen 4) displays grand and batch
totals for materials A and B.
Errors (Screens 5-14)
• 10 screens, 5 errors per page.
• Displays date, time, and error.
Pump Control (Screen 15)
• Manually start or stop a pump.
• Park pumps for brief shutdowns.
Setup Mode
The setup mode has four screen sections that allow an
authorized user to choose the exact settings needed for
the system:
Configure (Screens 18-21)
• Configure 1 (Screen 18) controls system type
(pump or meter), gun flush box enable, and
number of guns (1 or 2).
• Configure 2 (Screen 19) controls hose length
and diameter for one or two guns.
• Configure 3 (Screen 20) controls display lan-
guage, date format, date, time, password set-
ting, and backlight timer.
• Configure 4 (Screen 21) controls units for dis-
tance, volume and pressure.
20
Recipe (Screens 28 and 29)
• Recipe 1-1 (Screen 28) and 1-2 (Screen 29)
control Material 1/Color 1 parameters and flush.
Maintenance (Screens 24-26)
• Maintenance 1 (Screen 24) controls mainte-
nance timer actual and target for Pump A, Pump
B, Solvent Valve A, and Solvent Valve B.
• Maintenance 2 (Screen 25) controls color
valves A1 and B maintenance timers, actual and
target.
• Maintenance 3 (Screen 26) controls fluid and air
filter maintenance timers, actual and target.
Calibration (Screens 22 and 23)
• Calibration 1 (Screen 22) controls pump factors
for Pump A and Pump B.
• Calibration 2 (Screen 23) allows the user to per-
form a calibration.
Troubleshooting Mode
The troubleshooting mode has three screen sections
that allow an authorized user to troubleshoot system
operation.
System Inputs (Screen 35)
Membrane Test (Screen 36)
System Outputs and Manual Activation (Screen 37)
3A0868A