Overview
Overview
Usage
The ProMix 2KE is an electronic two-component paint
proportioner. It can blend most two-component paints. It
is not for use with quick-setting paints (those with a pot
life of less than 5 minutes).
•
Has dynamic dosing capabilities. It dispenses mate-
rial A, monitors fluid flow, and dispenses material B
in doses to cause the mixture to stay on ratio.
Component Identification and Definition
Component
Description
Control Box
•
Advanced Fluid Control Module
•
Power supply or alternator
•
Solenoid valves
•
Air flow switch(es)
•
Optional USB Module
•
Audible alarm
•
Optional pressure switch for gun flush box
Fluid Module
•
Mix manifold, which includes the fluid integrator and static mixer.
•
Color/catalyst valve stacks, includes pneumatically operated dose valves for material A
and B, as well as solvent valves.
•
Pumps
Display Module Used to set up, display, operate, and monitor the system. Used for daily painting functions
including choosing recipes, reading/clearing errors, and placing the system in Standby, Mix,
or Purge mode.
Installation
General Information
•
Reference numbers and letters in parentheses in
the text refer to numbers and letters in the illustra-
tions.
•
Be sure all accessories are adequately sized and
pressure-rated to meet system requirements.
•
To protect the Display Module screens from paints
and solvents, clear-plastic protective shields are
available in packs of 10 (Part No. 16F703). Clean
the screens with a dry cloth if necessary.
10
Table 1: Component Description
•
Can proportion at ratios from 0.1:1 to 30.0:1.
•
Will display the last 50 errors with date, time, and
event. The optional USB upgrade kit will log 500
errors and up to 2000 jobs.
•
For systems with one gun, an optional Gun Flush
Box provides an automated flushing system for a
manual spray gun.
3A0868A