Replacing The Sensors - Drager X-am 5000 Technical Manual

Replacing the Sensors

Damage to components!
There are components in the instrument that are sensitive to electric charge. Before
opening the instrument to replace the sensor, ensure that the person performing the
work is earthed to avoid damage to the device. Earthing can be safely ensured, e. g.
via an ESD workstation (electrostatic discharge).
To open the instrument, unfasten the casing screws using a screwdriver (Torx T6).

To replace the sensors of the device, connect the device with a PC.

Replace the sensors using the PC program Dräger CC Vision.
Calibration cradle (order no. 83 18 752)
with inserted
USB DIRA with USB cable (order no. 83 17 409)
E-Cal module Dräger X-am 125
(order no. 83 18 754)
CAUTION
NOTICE
IR
USB DIRA with USB cable
(order no. 83 17 409)
Replacing the Sensors
USB 2.0
USB 2.0
USB 2.0 / COM
Dräger
CC-Vision
Dräger
CC-Vision
Dräger
CC-Vision
E-Cal
59