Quantum StorNext QD7000 Replacing Manual page 13

15. Remove the antistatic protection.
16. Gather support data about your updated storage array by using one of these methods:
Use the storage management software to collect and save a support bundle of your storage array. From the Array
Management Window toolbar, select Monitor >> Health >> Collect Support Data. Then name and specify a
location on your system where you want to store the support bundle.
Use the CLI to run the save storageArray supportData command to gather comprehensive support data
about the storage array. For more information about this command, refer to the Command Line Interface and Script
Commands. Running this command can temporarily impact performance on your storage array.
4 NetApp® E-Series Storage Systems: Replacing a Fan Canister in the DE6600 Drive Tray