Table of Contents
Advertisement
4/ System Overview
The QBOX-2090 Series is a fanless system enclosed within a robust compact aluminum chassis with cooling fins,
offering the superior qualities for operation in harsh environments.
It can be optionally factory-equipped with an mPCIe WLAN card for two antennas and / or mPCIe /M.2 3G / 4G
modem adapter card and SIM card slot for one antenna. Users may choose the implementation of a 2.5" SATA HDD /
SSD and / or of an M.2 SSD card as storage media.
The following interfaces are available with the QBOX-2090 Series:
Standard Front Panel:
2x RS232/422/485
2x RS232
1x Line-Out
1x Line-In
1x Mic-In
1x Power Switch
1x Power LED
1x HDD LED
Standard Rear Panel:
1x HDMI
1x DP
2x GbE LAN
4x USB 3.0
1x DIO
1x 12 V DC Jack
2x Wi-Fi Antenna port
1x 3G / 4G Antenna port
Standard Baseboard and System Expansion Capabilities:
2x DDR3L SO-DIMM memory socket
1x SATA connector for 2.5" SATA HDD / SSD and 1x SATA power connector
1x full-sized mPCIe socket
1x M.2 Key B socket (type 22x42)
The device is designed to be operated in:
Vertical position: mounted on the back of the monitor or inside a control cabinet / custom enclosure / machine
(with a VESA mounting kit) or
Horizontal position: placed as a desktop unit.
When powering on the QBOX-2090 Series, make sure that the cooling fins of the chassis are
not obstructed (covered) by any objects.
To provide sufficient heat dissipation by the cooling of the device, do not cover the cooling
fins of the QBOX-2090 Series. Do not place any objects on the device. When installing the
system, please keep clearance for air circulation.
QBOX-2090 Series - User Guide, Rev. 1.2
// 17
Advertisement
Table of Contents
