Table of Contents
Advertisement
12.2.3. Power Setup Menu
The Power setup menu provides functions and a sub-screen for power configurations. The following sub-screen
function is included in the menu:
WatchDog Timer Configuration
Figure 30: BIOS Power Setup Menu
Main
Advanced
Power Configuration
ACPI Sleep State
Restore AC Power Loss
Power Saving Mode
Resume Event Control
Resume By LAN 1 Device
Resume By LAN 2 Device
Resume By MPCIE1 Device
Resume By M2 Device
Resume By Ring Device
Resume By RTC Alarm
> WatchDog Timer Configuration
Feature
ACPI Sleep State
Restore AC Power
Loss
Power Saving Mode
Resume By LAN 1
Device
Resume By LAN 2
Device
Resume By MPCIE1
Device
Resume By M2 Device
Resume By Ring
Device
Resume By RTC Alarm [Disabled], [Enabled]
BIOS SETUP UTILITY
Power
[S3 (Suspend to RAM)]
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Version 2.18.1263. Copyright (C) 2018, American Megatrends, Inc.
Option
Description
[S3 (Suspend to
Select whether to enable or disable suspend function and
RAM)]
determine an appropriate suspend mode.
[Power Off], [Power
Control whether the system will stay on after AC power is
On], [Last State]
removed and then restored.
Select [Power Off] if you want the system to remain off after
power restored.
Select [Power On] if you use a power strip to turn the system on.
[Disabled], [EUP
Select whether to enable Power Saving Mode.
Enabled]
[Disabled], [Enabled]
Select whether to enable or disable Wake from LAN 1 Device.
[Disabled], [Enabled]
Select whether to enable or disable Wake from LAN 2 Device.
[Disabled], [Enabled]
Select whether to enable or disable Wake from MPCIE1 Device.
[Disabled], [Enabled]
Select whether to enable or disable Wake from M2 Device.
[Disabled], [Enabled]
Select whether to enable or disable Wake from Ring Device.
Select whether to enable or disable Wake Up on Alarm, to turn
on your system on a special day of the month.
QBOX-2090 Series - User Guide, Rev. 1.2
Boot
Security
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Save & Exit
// 64
Advertisement
Table of Contents
