Installing An M.2 Ssd; Installing An Mpcie Expansion Card - Quanmax QBOX-2090 Series User Manual

5.1.2. Installing an M.2 SSD

To have access the M.2 socket please proceed according to the steps described:
1.
Open the device as described in the subsection 5.1 "Opening and Closing the QBOX-2090 Series" (step 1-5).
2. Locate the M.2 socket (CON1) (Figure 4, pos. 3) and the corresponding fixing bolt. (Figure 4, pos. 6).
3. Align the notches on the M.2 SSD with the notches in the M.2 socket (CON1). Insert the M.2 SSD into the
corresponding socket (Figure 4, pos. 3) and rotate it down with the fixing hole of the card over the fixing bolt.
4.
Press the M.2 SSD down on the side with the fixing hole and secure it with the available fastening screw (Figure 4,
pos. 6).
5.
In order to close the QBOX-2090 Series, proceed step 6 & 7 described in the subsection 5.1 "Opening and Closing
the QBOX-2090 Series".

5.1.3. Installing an mPCIe expansion card

To have access the mPCIe socket please proceed according to the steps described:
1. Open the device as described in the subsection 5.1 "Opening and Closing the QBOX-2090 Series" (step 1-5).
2. Locate the mPCIe socket (MPCIE1) (Figure 4, pos. 2) and the corresponding fixing bolt. (Figure 4, pos. 5).
3. Align the notches on the mPCIe expansion card with the notches in the mPCIe socket (MPCIE1). Insert the mPCIe
expansion card into the corresponding socket (Figure 4, pos. 2) and rotate it down with the fixing hole of the card
over the fixing bolt.
4. Press the mPCIe expansion card down on the side with the fixing hole and secure it with the available fastening
screw (Figure 4, pos. 5).
5. In order to close the QBOX-2090 Series, proceed step 6 & 7 described in the subsection 5.1 "Opening and Closing
the QBOX-2090 Series".
QBOX-2090 Series - User Guide, Rev. 1.2
// 28