The vertical mounting bracket complies with VESA 75 and VESA 100 patterns (Figure 8). To fasten the bracket, the
control cabinet / custom enclosure / machine / monitor / wall must have VESA 75 or VESA 100 screw pattern for
mounting.
Figure 9: Hole pattern of VESA mounting kit for QBOX-2090 Series
To mount the QBOX-2090 Series please proceed according to the steps described:
1.
Prepare the mounting surface with four screws and if necessary anchors corresponding to the mounting surface
type if no VESA-compliant screw holes are available.
2.
Secure the vertical mounting bracket to the mounting surface with four screws (Figure 10). The following figures
take mounting to a monitor as an example.
Figure 10: Securing the mounting bracket
QBOX-2090 Series - User Guide, Rev. 1.2
(unit: mm)
// 32