Safety; Target Audience; General Safety Regulations; Intended Use - LOGICDATA TOUCH Series Manual

2 SAFETY

2.1

TARGET AUDIENCE

This Operating Manual is intended for Skilled Persons only. Refer to Chapter 2.8 Skilled Persons on page 9 to
ensure that personnel meet all requirements.

2.2 GENERAL SAFETY REGULATIONS

In general, the following safety regulations and obligations apply when handling the product:
• Do not operate the product unless it is in a clean and perfect condition
• Do not remove, change, bridge, or bypass any protection, safety, or monitoring equipment
• Do not convert or modify any components without written approval from LOGICDATA
• In the event of malfunction or damage, faulty components must be replaced immediately
• Unauthorized repairs are prohibited
• Do not attempt to replace hardware unless the product is in a de-energized state
• Only Skilled Persons are allowed to work with TOUCH Handsets
• Ensure that national worker protection conditions and national safety and accident prevention
regulations are observed during operation of the system

2.3 INTENDED USE

The products in the TOUCH Family are Handsets for electrically Height-Adjustable Tables. They are installed
by Resellers into Height-Adjustable Table systems. They are used to control Height-Adjustable Table systems
via a Control Box. They are intended for indoor use only. They may only be installed in compatible Height-
Adjustable Tables and with LOGICDATA-approved accessories. Contact LOGICDATA for further details. Use
beyond or outside the intended use will void the product's warranty.

2.4 REASONABLY FORESEEABLE MISUSE

Usage outside of the intended use may lead to minor injury, serious injury, or even death. Reasonably fore-
seeable misuse of the Handset includes, but does not extend to:
• Connecting unauthorized parts to the product. If you are unsure as to whether a part can be used
with a Handset, contact LOGICDATA for further information
TOUCH FAMILY - OPERATING MANUAL // PAGE 6