Key Lock - LOGICDATA TOUCH Series Manual

7.4 KEY LOCK

CAUTION Risk of minor or moderate injury through uncontrolled movement
When attempting to activate the Key Lock, pressing the Handset too forcefully may
cause the table to move unexpectedly. Failure to anticipate the table's movements may
lead to minor or moderate injury through crushing.
• Do not press the Handset too forcefully while activating the Key Lock
INFO
The Handset must be turned on for the Key Lock to be activated. To activate a locked
Handset, press any key.
INFO
The Key Lock is only available as standard on certain models of the TOUCHfx and
TOUCHdown. On other models it can be activated during parameterization. Check the
Order Code for your Handset to see if Key Lock is activated as standard.
Activating the Key Lock prevents you from moving the table if you accidentally press a Key. The Key Lock
can be activated and deactivated by swiping across the bottom edge of the Handset. Alternatively, swipe
horizontally across the left or right-hand side of the Handset (figure 5, Activating the Key Lock). The display
must be active for you to activate the Key Lock. To activate an inactive display, press any Key.
Fig. 13: Activating the Key Lock
After you have activated the Key Lock, a key is displayed on the screen.
Fig. 14: Locked Handset
TOUCH FAMILY - OPERATING MANUAL // PAGE 25