INDEX
1.
2.
3.
4.
5.
6.
7.
8.
STEAM _______________________________ 6
9.
XF331M) ______________________________ 7
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
1592012000 XF330M XF331M XF332M GB REL1.0 31.08.2015
1. General Warnings
1.1 Please read before using this manual
This manual is part of the product and should be kept
near the instrument for easy and quick reference.
The instrument shall not be used for purposes
different from those described hereunder. It cannot
be used as a safety device.
Check the application limits before proceeding.
Dixell Srl reserves the right to change the
composition of its products, even without notice,
ensuring the same and unchanged functionality.
1.2
Safety Precautions
Check the supply voltage is correct before connecting
the instrument.
Do not expose to water or moisture: use the controller
only within the operating limits avoiding sudden
temperature changes with high atmospheric humidity
to prevent formation of condensation
Warning: disconnect all electrical connections before
any kind of maintenance.
The instrument must not be opened.
In case of failure or faulty operation send the
instrument back to the distributor or to "Dixell s.r.l."
(see address) with a detailed description of the fault.
Consider the maximum current which can be applied
to each relay (see Technical Data).
Ensure that the wires for probes, loads and the power
supply are separated and far enough from each
other, without crossing or intertwining.
In case of applications in industrial environments, the
use of mains filters (our mod. FT1) in parallel with
inductive loads could be useful.
2. General description
Models XF330M, XF331M and XR332M, 72x144 mm
format, are microprocessor based controllers suitable for
applications on oven with two different heater one on the
top and one on the bottom. They are provided with six
relay outputs to control heaters, light, extractor, fan, steam
heater, steam injection.
It is also provided with two probes configurable as
thermocouple J or K and PT100.
The standard "Hot key" output allows the user to
programme the parameter list.
XF330M XF331M XF332M
2/12