Daikin VAM 350GJVE Service Manual page 72

Si71-502
1.1.6 Field Setting
(Example of setting operation)
Centralized control 1. Press
group No. setting 2. Set mode No. to "00" using
(mode No.: 00) 3. Set centralized control group No. using
4. Enter displayed group No. by pressing
5. Press
Centralized control For group control, the following step must be performed.
group No. setting (*) Set unit No. using
(mode No.: 30)
Procedure for
entering individual
settings (mode No.:
44) < Example >
1. Press
2. Set mode No. to "44" using
3. Set unit No. using
4. Set ventilation mode using
5. Set ventilation volume using
6. Enter settings by pressing
Supplementary Explanation
for more than 4 seconds.
to return to normal operation mode.
.
The setting is generally the same for all units in the same group control system. However, the setting of
selected units can be fixed by the following method.
Ventilation volume
at High
for more than 4 seconds.
.
Unit No.
or .
[ ] or
.
Unit No.
Centralized
control group No.
High
High
Ventilation volume fixed at Low
or .
[ ].
[ ].
.
Mode No. Ventilation volume
(heat reclaim ventilation unit)
Supplementary Explanation
[ ].
(HL053)
Mode No.
Low
(HL054)
Ventilation mode
(heat reclaim ventilation unit)
A
(HL055)
63