Daikin VAM 350GJVE Service Manual page 89

Operation Procedure
The HRV unit cannot be operated independently when the air conditioner is connected to the HRV
unit via a duct. When using the HRV unit, set the air conditioner to "fan" mode on weak fan
strength.
• Each time you press the operation selection button, the operation mode display will change as shown in
Example 1:
In case of the remote controller "BRC1C61" and as equivalent.
Display changes as below.
NOTE) Current Ventilation mode can be visible and selected on the remote controller.
80
the figure below.
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
VRV:
Stopping
HRV:
Heat exchange mode
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
Operation mode display
"Ventilation" is displayed.
Operation mode
selector button
hr
hr NOT
AVAILABLE
TEST
TEST
Remote controller
for indoor unit
When air conditioner and HRV
unit are not connected via duct
<Operation mode>
When air conditioner and HRV
unit are connected via duct
<Operation mode>
Si71-502
Operation Manual