Installing Ethernet ROM
Note
Install the
Ethernet ROM
If the same unique Ethernet address is not required, for
example, for a standalone system, then do not install the
Ethernet ROM. Consult with the customer.
To install the Ethernet ROM in the new KA49 system module,
complete the following steps:
Step
Action
1
Remove the Ethernet ROM from the KA49 system module
and install it in the old KA46 system module.
2
Take the Ethernet ROM that was placed on the antistatic
mat from the old KA46 system module and install it in
the new KA49 system module.
3–5