Advertisement
The pusher is located in the same casing as the lock, which allows not to mount a handle on
the door. If necessary, positions of the lock and the pusher inside the casing can be
interchanged; to do this, screw out the screw on the back side of the lock (may be hidden under
the sticker) and remove the metal base of the lock.
As voltage is applied, the lock will become unlocked, but the door will remain closed. To open
the door, press on it, then the lock, with its built-in pusher, will push and open the door slightly. If
the door was not pressed upon, then, after de-energizing, the lock will become blocked and the
door will remain locked.
5. TECHNICAL DATA
5.1
TECHNICAL DATA
Modification
Version
DC supply voltage U, V
Current consumed, А
Supply pulse duration (not more
than), s
Minimum pause between
pulses, s
Lock weight (not more than), kg
Holding force (not less than), kg
Power wire length, m
Allowable thickness of door glass,
mm
3 holes
Promix-SM112.10
normally closed
12±2
0.1 (at 12V)
not rated.
not rated.
0.17
150
0.1
4-8
Promix-SM112
3
Advertisement
