Gira 0384 00 Operating Instructions

Leak sensor

GIRA

Leak Sensor

Info

Operating Instructions

Leak Sensor

Function

The water detector consists of a monitoring device (1) and a sensor (2). If water wets the sensor, the

monitoring device activates an alarm with an LED (3) and an acoustic signal. At the same time, a

zero-voltage contact for additional alarm devices or devices such as a horn, light signaller or shut-off

valve.

1. Deenergise device

2. Pull off cover

3. Fastening is carried out with two 4 x 40 mm cap screws in diagonally opposite holes (4)

4. Screw on cover

5. Secure sensor (2) on bottom of monitoring area

•

Sensor must be dry

•

Insert mains plug (8) in socket outlet

•

LED for operation (9) is green

Leak Sensor

08/96

Order No.: 0384 00

Page: 1 of 3

Table of Contents

Do you have a question about the 0384 00 and is the answer not in the manual?

Page 1 Info Operating Instructions Leak Sensor Order No.: 0384 00 Function The water detector consists of a monitoring device (1) and a sensor (2). If water wets the sensor, the monitoring device activates an alarm with an LED (3) and an acoustic signal. At the same time, a zero-voltage contact for additional alarm devices or devices such as a horn, light signaller or shut-off valve.
Page 2: Technical Data
GIRA Leak Sensor Info Operating Instructions Connecting zero-voltage contact 1. Deenergise device 2. Pull off cover 3. Replace blind plug (5) with screwed cable gland (6) 4. Insert cable through gland 5. Connect cable for zero-voltage contact to terminal block (7)
Page 3 GIRA Leak Sensor Info Operating Instructions Warranty We provide a warranty in accordance with the statutory requirements. Please send the device postage paid with an error description to our central customer service centre. Gira Giersiepen GmbH & Co. KG Service Center Dahlienstraße 12...