A 6.2 Replacing The Ball Bearings - KaVo K-POWERgrip EWL 4941 Operating Instructions Manual

K-POWERgrip EWL 4941.

A 6.2 Replacing the ball bearings

Dismantling
Slowly turn the shaft by the straight pin "
until clip B can be inserted into grip tip #
with little resistance.
.
Loosen grip tip in direction of arrow
and remove clip.
Completely unscrew grip tip and remove
felt washer \.
Grip handpiece part £ and loosen thread-
ed ring | with socket wrench E and
unscrew.
Remove complete shaft unit · from
K-POWERgrip handpiece EWL 4941.
Remove ball bearing ¯ and bush » from
shaft.
Hold shaft with key D and loosen nut „
with socket wrench E - Note left-handed
thread.
Remove nut „ with ball bearing ‰ from
shaft.
#
"
B
\
|
E
·
»
¯
„
D
7
£
E
„
‰