SCAN 1010 Series Assembly And Instruction Manual page 9

Positioning your wood-burning stove
The wood-burning stove must be set up so that the stove itself, the
flue pipe, and the chimney can all be cleaned.
Load bearing underlay
All of the products in our portfolio are classified as light-duty firepla-
ces; in most cases, there is no need to reinforce the floor, so that you
can typically use the normal floor.
However, you should make sure that the load bearing underlay can
bear the weight of the wood-burning stove and that of the chimney.
Distance to furniture: 1400 mm
But please check to avoid furniture or other furnishings being dried
out due to being too close to the stove.
All national and local requirements concerning safety distances for
wood burning stoves must be respected.
If you connect the stove to a steel chimney, the safety distances of
the steel chimney must also be respected.
Radiance distance to combustible objects out-
side the modules.
A S S E M B LY
Min.
140 mm
Distances to combustible floor.
Remember to place a floor plate.
Scan 1010
Min. 1400 mm
Min. 400 mm
9
Min.
140 mm