iM3 REVOLUTION 4DC Manual page 39

NOTE: This section applies only to models RX DC REF: I3PV***W*
(Character * can be any alphanumeric value)
NOTE: This section applies only to models RX DC REF: I3PV***C*
(Character * can be any alphanumeric value)
Plate images are purely illustrative; refer to the plate placed on the device.
EN
Collimator.
The nameplate for the rectangular collimator is found
outside it.
Data given on plate:
- Name and address of the manufacturer.
- Equipment code.
- Technical data.
- DHHS compliance.
- Serial number.
- Month and year of manufacture.
Wireless handheld.
The nameplate for the handheld is found in the battery
compartment.
Data given on plate:
- Name of manufacturer.
- Name of equipment.
- Rated voltage.
- Number and type of batteries.
- Serial number.
Wired handheld.
The handheld control plate is located at the centre on the
back.
OPERATOR'S MANUAL
39