Page 2
This manual outlines a step by step procedure to perform both a daily, weekly and annual service on your iM3 GS Start, GS Deluxe, GS Deluxe LED, Elite or Pro2000 dental unit. Please note that servicing is essential to maintain the dental unit’s optimal performance and to comply with warranty. If you have any difficulties or questions, you can contact a member of our team on +353 1 6911 277.
Page 3
Self Service Manual - Dental Units An alternative to oiling all of your handpieces is the iM3 HCR-100. This is an oiling unit that blows air to help dislodge any debris while also lubricating the handpieces. It is supplied with a 500ml bottle of oil,...
Page 4
The blue line goes into the distilled water bottle (clear) while the green line goes into the CLS bottle (brown). We advise you use distilled water over a direct water supply. Please speak with your iM3 representative for more information and measures that need to be taken when working with a direct water supply.
Page 5
5 bar. If the pressure on your dials is displaying a figure outside of this range, please contact iM3 Support on +353 1 6911 277 for instruction. Handpiece Speed While not a part of your service, it is no harm to make sure your handpieces are operating at the correct speed.
Page 6
Self Service Manual - Dental Units Product Code Description MD30 Handpiece Oil - 30ml bottle MD400 Handpiece Oil - 400ml Aerosol MD4010 Aersol Nozzle for High Speed MD4020 Aersol Nozzle for Low Speed HCR-100 HCR-100 Oiling Unit ST312 500ml Oil for HCR-100...
Need help?
Do you have a question about the PRO 2000 and is the answer not in the manual?
Questions and answers