Description Of Display And Operation Panels; Name And Description Of Operation Panel - YOKOGAWA Vigilantplant IR200 User Manual

5. DESCRIPTION OF DISPLAY AND OPERATION PANEL
This section describes the display and operation panel of the gas analyzer. It also explains the name and
description of function on the operation panel. See Fig. 5-1.

5.1 Name and description of operation panel

POWER
Power switch
Controls
(1)MODE key
Name
Used to switch the mode.
(1) MODE key
Used to change the selected
(2) SIDE key
item (by moving the cursor)
and numeral digit.
(3) UP key Used to change the selected
item (by moving the cursor)
and to increase numeral value.
Used to change the selected
(4) DOWN key
item (by moving the cursor)
and to decrease numeral value.
Fig. 5-1 Name and description of operation display and panel
IM 11G02M01-01E
Display
INFRARED GAS ANALYZER
MODE ESC ZERO
ENT SPAN
• Display : The measurement screen and the setting items are displayed.
• Controls : The configuration is as shown below.
(3)UP key
MODE
(2)SIDE key
(4)DOWN key
Description
(5)ESCAPE key
ESC ZERO
ENT
(6)ENTRY key
Name
(5) ESCAPE
Used to return to a previous screen
or cancel the setting midway.
key
(6) ENTRY Used for confirmation of selected
items or values, and for execution
key
of calibration.
(7) ZERO key
Used for zero calibration.
(8) SPAN key
Used for span calibration.
(7)ZERO key
SPAN
(8)SPAN key
Description
5 - 1