5.
DESCRIPTION OF DISPLAY AND
OPERATION PANELS
This section describes the display unit and operation panel of the analyzer unit. It also explains the
name and description of function on the operation panel.
5.1
Name and description of operation panel
Power switch
Operation panel
Fig. 5-1
Name
(1) MODE key
(2) SIDE key
(3) UP key
(4) DOWN key
<5.DESCRIPTION OF DISPLAY AND OPERATION PANELS>
Display Unit
POWER
MODE
ESC
ZERO
ENT
SPAN
● Display unit : The measurement screen and the setting items are displayed.
● Operation panel : The configuration is as shown below.
(3) UP key
(1) MODE key
(2) SIDE key
(4) DOWN key
Description
Used to switch the mode.
Used to change the selected
item (by moving the cursor) and
numeral digit.
Used to change the selected item
(by moving the cursor) and to
increase numeral value.
Used to change the selected item
(by moving the cursor) and to
decrease numeral value.
(5) ESCAPE key
(7) ZERO key
(8) SPAN key
(7) ENTRY key
Name
(5) ESCAPE key Used to return to a previous screen
or cancel the setting midway.
(6) ENTRY key
Used for confirmation of selected
items or values, and for execution
of calibration.
(7) ZERO key
Used for zero calibration.
(8) SPAN key
Used for span calibration.
5-1
F5_1.ai
Description
IM 11G02N01-01E