TP-Link Archer MR600 User Manual page 100

FAQ
Q1 How do I restore my router to its factory default settings?
• Reset the router manually:
With the router powered on, press and hold the RESET button on the rear panel until the
Power LED starts flashing.
• Reset the router via web management page:
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Click Advanced
3 Click Factory Restore
4 Wait for the resetting and then the router will automatically reboot.
Note:
Once the router is reset, the current configuration settings will be lost and you will need to re-configure the router.
Q2 What should I do if I forget my password?
• Web management page password:
Restore the router to its factory default settings and then create a new password using
1-32 characters.
• Wireless network password:
1 The default Wireless Password/PIN is printed on the product label of the router.
2 If the default wireless password has been changed, log in to the router's web
management page and go to
• TP-Link ID password:
Click Forgot password
reset it
Q3 What should I do if I cannot access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer has connected to the router correctly and the corresponding
LED lights up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure you enter the correct IP address to log in: http://tplinkmodem.net.
• Check your computer's settings:
> System Tools > Backup & Restore
to reset the router.
Basic
on the TP-Link ID login page and then follow the instructions to
Obtain DNS server address
page.
> Wireless to retrieve or reset your password.
automatically.
Obtain an IP address
96