Chapter 6
6 3
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless)
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to
Advanced
3 Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s)
1 ) Select
Blacklist
and click Save.
2 ) Select the device(s) to be blocked in the
3 ) Click
Block
above the
Devices in Blacklist
To allow specific device(s)
1 ) Select
Whitelist
and click Save.
2 ) Click Add.
>
Security
>
Access Control
Online Devices
automatically.
and enable
Access
Online Devices
table.
table. The selected devices will be added to
Network Security
Control.
24