Table of Contents
Advertisement
Chapter 11
Note:
•
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router's WAN port and synchronize your System Time with internet.
•
The first time you configure the OpenVPN Server, you may need to
Server.
3. Select the
Service Type
4. Enter a VPN
Service Port
should be between 1024 and 65535.
5. In the
VPN Subnet/Netmask
to the device by the OpenVPN server.
6. Select your
Client Access
remote device to access your home network; select
you also want the remote device to access internet through the VPN Server.
7. Click Save.
8. Click
Generate
to get a new certificate.
Note:
If you have already generated one, please skip this step, or click
(communication protocol) for OpenVPN Server: UDP, TCP.
to which a VPN device connects, and the port number
fields, enter the range of IP addresses that can be leased
type. Select
Home Network Only
Generate
Specify Your Network Settings
Generate
a certificate before you enable the VPN
if you only want the
Internet and Home Network
to update the certificate.
if
65
Hide quick links:
Advertisement
Table of Contents
